The Meyer UPA-2P’s narrow pattern enables precisely controlled coverage and arrayability and increases efficiency at high frequencies This versatile unit has many sound reinforcement applications, as a main front-of-house loudspeaker in smaller venues (singly or in arrays), as a delay or fill loudspeaker in larger systems, and more.
The Meyer UPA loudspeakers provide high power output, low distortion, and consistent polar response in a compact, vented two-way enclosure for exceptional fidelity and extended high-frequency performance.
The Constant-Q horn affords uniform response throughout the coverage area. In addition, extraordinarily flat amplitude and phase response allow for tonal accuracy and precise imaging.
Specifications
| Operating Frequency Range | 60 Hz - 18 kHz |
| Free Field | 100 Hz - 16 kHz ± 3dB; -6 dB at 77 Hz and 18 kHz |
| Half-Space | 77 Hz - 16 kHz ± 3dB; -6 dB at 66 Hz and 18 kHz |
| Phase Response | ± 35° 600 Hz - 16 kHz; + 90° at 250 Hz |
| Maximum SPL | 133 dB SPL |
| Coverage | 45° H; 45° V |
| Crossover | 1000 Hz |
| Low Frequency Transducer | 12" cone driver |
| High Frequency Transducer | 3" diaphragm compression driver |
| Input Module Type | Differential balanced input circuit |
| Connector | Female XLR; male XLR loop |
| Impedance | 10 kΩ differential balanced (between pins 2 and 3) |
| XLR Wiring | Pin 1: chassis; Pin 2: + signal; Pin 3: - signal |
| RF Filter | Common Mode: 425 kHz low-pass; Differential Mode: 142 kHz low-pass |
| Common Mode Rejection Ratio | > 80 dB (50 Hz - 1 kHz); typically 90 dB |
| Amplifier Type | Complementary power MOSFET output stages (class AB/bridged) |
| Burst capability | 350 Wrms/channel |
| THD, IM, TIM | < .02 % |
| AC Power Connector | PowerCon locking AC connector |
| Automatic voltage selection | 80-264 VAC continuous; 47/63 Hz |
| Dimensions | 14.5" W x 22.4" H x 14.5" D |
| Weight | 35 kg (77 lbs) |
| Enclosure | 5/8” plywood |
| Finish | Black textured |
| Protective Grill | Hex perforated steel grill, charcoal grey foam |
