Audio Visual Events® Logo | AV Hire Sydney

K-Array KR200S PA System 4000W

The K-array Redline Series KR200s is a compact and efficient portable powered PA/stage monitor system ideal for Concert Halls, Theatre, Houses of Worship and AV presentations.

It is comprised of the KL18ma self-powered subwoofer with an additional DSP controlled powered output and 35mm pole adaptor designed for a KR200 ultraslim line array satellite speaker.

The K Array KR200 is comprised of 2 x two meters stainless steel chassis each containing 32 x 2” neodymium transducers. They are 5.5 cm wide and 7 cm deep, weighing 9 Kg total. They are hinged together for focusing and easier transport. Due to the slim profile and minimum distance between drivers it reproduces the full vocal frequency range with clear intelligibility and excellent phase coherent 120° x 7° coverage. 

The 18” long-excursion speaker of the KL18ma sub section employs a neodymium magnet and 3” voice coil. The large ports are designed to be fully symmetrical to the speaker, which means the back loading on the driver is consistent and even, with no port air turbulence. The cabinet weighs a mere 20 Kg. The triangle port construction provides excellent structural integrity and strength, effectively eliminating any box resonance.

The overall system response is from below 40 Hz to 19KHz with 127dB continuous and 133 dB peak output.

An internal DSP module provides control presets. The output can optionally be used to power the KL18 passive subwoofer. Dedicated software allows for remote control of the system from a PC


• Unique performance-to-size ratio

• High power 127dB continuous, 133dB peak

• Fitted with integral handles

• Line array emission wavefront

• Integrated mounting system

• DSP on board with 16 dedicated presets

• Remote PC control software (RS485)

• Ultra fast set-up and dismantling system


Speakers power handling 800(sub) + 500(sat) w(EAS)
Max power 1200(sub) + 1200(sat) w 1
Impedance 8Ω(sub)+16Ω(sat)
Frequency range 30Hz - 19 KHz +/- 3dB (preset dependent)
SPL 1W/1mt 97 dB (sub) 101 dB (sat) 2
Maximum SPL 127dB continuous - 133 dB peak
Horizontal Coverage 100°
Vertical Coverage
Crossover Type DSP controlled
Frequency 150 Hz minimum (preset dependent)
Low frequency Transducer 1 x 18” Neodymium speakers with 3” voice coil
High frequency Transducer 32 x 2” Neodymium speakers with 0,75” voice coil
Audio Input Connectors male + female parallel 3-pin balanced XLR
Wiring Pin1 = ground - Pin2 = hot - Pin3 = cold
Audio powered Output Connector Female Speakon
Wiring Pin1+= CH1+ Pin1= CH1- Pin2+= N.C. Pin2= N.C.
Remote control Input Connectors 1 x female 8 poles RJ45
Power Input Connectors 2 x PowerCon IN/OUT
Amplifier Type 1 modules class D - DSP controlled
Subwoofer power 1000 Watt 3 @8Ω
Satellite power output 1000 Watt 3 @8Ω
Protection Dynamic limiter, over current, over temp, short circuits
AC power Operating range 210 - 240 Vac 50Hz (Default) 100 - 120 Vac 60Hz (Selectable)
I. nom 5.5 A / 115 Vac - 2.9 A / 230 Vac
Minimum operation voltage 95 Vac - 195 Vac
Maximum operation voltage 125 Vac - 205 Vac
Max continuos and burst current Default 6A(>10 sec) - 12A (10 sec) - 20A (<1sec)
Physical Dimensions KL18ma: 46.5 x 47.5 x 61 cm (18.31”x 18.70” x 24.02”) KR200: 5.7 x 222.5 x 7.4 cm (2.24”x 87.60” x 2.91”)
Weight KL18ma: 25.8 Kg (56.88 lbs) KR200: 8.2 Kg (18.08 lbs)
Brand URL :

Join our mailing list!

Sign up to hear our latest news and new product announcements!