The Clear-Com HME DX410 is a newly designed two-channel digital wireless comms system, operating in the 2.4GHz band, that delivers an overall better experience in performance, range and sound. The system features 7kHz wideband audio, 2-wire and 4-wire bridging, and 2-wire auto-nulling for fast integration with Clear-Com or TW wired partyline systems.
The DX410 offers an advancement in sound quality: the high definition 7kHz wideband audio technology. The high quality audio expands audio range and increases intelligibility in high RF environments so even soft whispers can be heard clearly. With an upgraded radio and lost packet concealment capability, the DX410 delivers an improved experience in performance, range and sound.
Features
• Two-Channels
• 2.4 GHz frequency range
• 7KHz wide band audio
• 2-wire and 4-wire bridging on the same system
• 2-wire auto-nulling
• Lost packet concealment
• Supports up to 15 beltpacks and/or wireless headsets
Specifications
Audio |
Channels | 2 audio channels |
Capacity | Up to 15 BP410 and/or WH410 per base station |
Full Duplex | Yes. Single-channel = 4 in simultaneous full-duplex. Dual-channel = 3 in simultaneous full-duplex |
Radio Frequency Range | 2400–2483.5 MHz |
Audio Frequency | 200 Hz – 7KHz |
4-wire I/O | RJ45, 600 Ohms balanced, level adjustable, simultaneous operation with 2-wire |
2-wire I/O | XLR-3M, XLR-3F, externally-switchable RTS or Clear-Com, 200 Ohms, level adjustable, null adjustable to 50dB attenuation, typical |
Aux Input | XLR-3F with ¼” (6.35mm) combo jack, 600 Ohms balanced, level adjustable |
Aux Output | XLR-3M, 600 Ohms balanced, level adjustable |
Headset Connector | 4-pin mini-DIN, Electret microphone |
Headset Output | 200mW into 32 Ohms |
Antenna Type | External ½-wave dipole (R-TNC connector), RX/ TX horizontal/vertical diversity |
System Distortion | <2% |
Communication Security | 64-bit encryption, dual-slot diversity |
Transmitter |
Type | Frequency Hopping, Spread Spectrum (FHSS) |
Transmit Power | 100mW burst |
Modulation Type | Gaussian filtered FSK, TDMA |
Frequency Stability | 13 ppm |
Harmonics/Spurious | Exceeds FCC and ETSI specifications over temperature |
Type | Frequency Hopping, Spread Spectrum (FHSS) |
RF Sensitivity | 13 ppm |
Distortion | <2% |
Environmental |
Temperature | 0°C - +50°C (+32°F - +122°F) |
Dimensions | (44 x 483 x 435 mm) (HxWxD) |
Weight | 4.1 kg (9 lbs) |
Power Requirements | 100 – 240 VAC, 50 – 60 Hz or 12 – 14 VDC |