The Jands Ezicom headset intercom substation is designed to meet communication needs in contemporary stage productions, particularly where high ambient noise levels may be experienced. A basic system would consist of one E-400 or E-200 master station connected to a number of remote E-100/E300 substations.
Features
* Up to 20 remote substations can be connected to one E-400 or E-200 master station
* Up to 100 remote E-100 substations may be run in a system which uses multiple master stations to supply power
* Connection between the master station and the substations is via standard two-core screened microphone cable
* Audio levels remain constant when stations join or leave the line
* Cable lengths of up to a kilometre may be used without any problems
* Audio circuits are designed to give high intelligibility even in the presence of dimmer noise and strong RF fields
* Single channel operation
* Headset connector
* Headset level control
* Channel "Call" push switch with red LED
* Microphone "On/Off" switch with green LED
* Input and output link connectors
* Belt clip
Specifications
| Power supply: | 30(±10%)V DC |
| Consumption: | 50mA average, 100mA max |
| Connector: | 3-pin male and female AXR |
| Signal to noise ratio: | >80dB |
| Microphone | |
| impedance: | 50~600Ω nominal |
| Headset | |
| impedance: | 8~2000Ω nominal |
| Headset power: | 200mW @1k Hz, 0.1%THD (8Ω load) 1300mW @1k Hz, 0.1%THD (200Ω load) 450mW @1k Hz, 0.1%THD (600Ω load) |
| Headset | |
| connector(s): | 13Cannon 4-pin AXR connector |
| Dimensions: | 85mm (W)343mm (H) 3120mm (D) |
| Net/shipping weight: | 05./0.8kg |
| | |
