LumenRadio CRMX Nova RX RDM is a receiver for one DMX/RDM universe being transmitted by any CRMX transmitter. It supports one full DMX/RDM universe of up to 512 channels at maximum refresh rate. Together with a RDM compliant CRMX Nova transmitter, the CRMX Nova RX RDM also supports RDM (ANSI E1.20). Use it together with LumenRadio CRMX SuperNova RDM controller and management software to monitor signal strength and make settings from a remote location. Connect it to any RDM enabled fixture to get wireless feedback from the fixture.
Based on advanced CRMX technology, the CRMX Nova RX RDM brings you all the advanced features such as Automated Cognitive Coexistence, DMX fidelity, lowest latency in the industry at 5ms, 128 bit encryption and much more. In addition to this, you will get the possibility to configure and monitor your fixtures over RDM, without having to drag a cable. To fit into old wireless systems with legacy equipment, the CRMX Nova RX RDM is compatible with W-DMX™ transmitters working on the 2.4 GHz band. Using it in this way will not allow you to make use of the benefits of the advanced CRMX technology or RDM.
CRMX Nova RX RDM is compatible with all other CRMX products in our hire stock.
CRMX Nova RX RDM utilizes the international license free ISM band on 2.4GHz.
Specifications
| Supported protocols | USITT DMX512, DMX512(1990) & DMX512-A
RDM ANSI E1.20 |
| Power | High voltage input: 85-264VAC / 47-70Hz / 10W
Low voltage input: 12VDC ±20% / 7.5W
Overvoltage and ESD protected power inputs
PoE, Power over Ethernet |
| RF characteristics | Operational frequency range: 2402-2480 MHz
Output power levels: 300mW (25dBm) (only allowed in North America), 100mW (20dBm), 50mW (17dBm), 10mW (10dBm)
Tested link range: up to 1000 meters line-of-sight |
| Connectors | DMX: 1 XLR Neutrik® 5-pin gold plated female
Antenna: RP-TNC male
Ethernet: 1 RJ45
AC: IEC 320-C14 male
DC: Pluggable terminal strip, Phoenix® MSTD 2,5 |
| Dimensions | (W x H x D): 110 x 44 x 125 mm (4.3″ x 1,7″ x 6.3″) |
| Weight | 700g, 24oz |
| Enclosure | Anodized extruded aluminum |
