The 12,000 lm Panasonic PT-RZ12K 3-Chip DLP Series Projectors combine class-leading imaging with the practical advantages of Panasonic SOLID SHINE Laser Technology; minimal picture quality degradation over long periods in continuous use, 20,000-hour maintenance-free operation, flexible installation, failsafe reliability and a wealth of powerful features for creative visual presentations in large spaces.
The projector is fitted in a strong and sturdy rental frame. These can be stacked together to a total of 3 for extra brightness and can be flown by a single point hanging bracket. The projector is hired complete with roadcase to protect the sensitive optics.
Bright and Vivid Picture Quality
Combining 3-Chip DLP imaging with Panasonic's original SOLID SHINE Laser Technology, the PT-RZ12K Series achieves truly stunning picture quality. Two powerful solid-state laser light sources, a heat-resistant phospher wheel and three independent DLP chips for red, green and blue ensures class-leading brightness, colour accuracy and contrast.
Accurate Colour Reproduction
The PT-RZ12K Series captures a more accurate Rec. 709-compliant colour space than comparable laser projectors. A blue laser ensures greater precision while an expanded colour gamut improves white balance accuracy
Flexible Setup and Smooth Operation
Unlike conventional lamp-based projectors, the PT-RZ12K Series' SOLID SHINE Laser system allows free 360-degree installation through any axis. Together with powered lens shift and a wide range of lenses, the projector can be mounted in any way desired without picture distortion.
Quick Start, Quick Off
The laser light source does not require any warm-up time, so images appear almost instantly with PT-DZ12K Series projectors. There's also no cooling time required when turning the power off. Users can turn the projector on and off immediately as many times as necessary.
AVE have invested in state-of-the-art projector rental frames. Up to 3 projectors can be easily stacked in normal or inverted orientations using the frame stacking pins that lock together with locking pins. Adjustments can be done quickly by one person with front ratcheting pitch and tilt screws. Each projector within a stack can be individually adjusted without affecting the others. The frame also features horizontal adjustment by turning the rear handle. A single point truss mount clamp is included with each projector hire and adds further rough and fine pan / tilt adjusting options.
|Brand ||Panasonic |
|Model ||PT-RZ12K |
|Power supply ||100–240 V AC, 50/60 Hz |
|Power consumption ||1,200 W (1,280 VA) (0.3 W with Standby Mode set to Eco, 4 W with Standby Mode set to Normal); |
Average power consumption: 800 W (Normal Mode), 680 W (Eco Mode), 620 W (Long Life 1 Mode), 590 W (Long Life 2 Mode), 550 W (Long Life 3 Mode)
|DLP Chip Panel size ||24.4 mm (0.96") diagonal (16:10 aspect ratio) |
|Display method ||DLP™ chip x 3, DLP™ projection system |
|Pixels ||2,304,000 (1920 x 1200) x 3, total of 6,912,000 pixels |
|Refresh Rate ||120 Hz |
|Lens ||Multiple Lenses available |
|Light Source ||Laser diode (Class 1), Light source life: |
20,000 hours (Normal Mode) / 24,000 hours (Eco Mode)
|Screen size (diagonal) ||1.78–25.4 m (70–1,000˝), 1.78–15.24 m (70–600") with the ET-D75LE8 |
3.05-15.24 m (120–600") with the ET-D75LE90, 16:10 aspect ratio
|Brightness ||12,000 lm |
|Contrast ||20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3) |
|Resolution ||1920 x 1200 pixels |
|Supported RGB signal ||XGA–WUXGA |
|Supported video signal ||NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i |
|Optical axis shift (from center of screen) Vertical ||±55 % (±44 % with the ET-D75LE6, +73 – +78 % with the ET-D75LE90) (powered) |
|Optical axis shift (from center of screen) Horizontal ||±20 % (±15 % with the ET-D75LE6, ±6 % with the ET-D75LE90) (powered) |
|Keystone correction range ||Vertical: ±40° (±22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±15° (0° with ET-D75LE90) |
|Keystone correction range with Installed Upgrade Kit ET-UK20 ||Vertical: ±45° (±40° with ET-D75LE10/ET-D75LE20, ±22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±40° (±15° with ET-D75LE50/ET-D75LE6, 0° with ET-D75LE90) |
|Installation ||Ceiling/floor, front /rear, free 360-degree installation |
|Cabinet materials ||Molded plastic |
|Operation noise ||43 dB |
|Operating environment ||Operating temperature: 0–50 °C (32–122 °F), |
operating humidity: 10-–80 % (no condensation)